science of strength ®

Construction Grout

CROSfill

CROSfill 510

CROSfill 530

CROSfill 570 Ultra-Flow & Cure

CROSfill 530

Innovative Construction Grouts for construction & concrete repair

The Crosbe Construction Grout range offers highly versatile solutions that perform a wide range of roles in a variety of applications, ranging from precast installation to emergency repairs.

Crosbe Construction Grouts are also employed by engineers in structural applications, while also regularly being relied upon for commercial projects such as multi-story building, industrial factories, and manufacturing plants.

All our Construction Grout products are manufactured locally at our state-of-the-art facility in Sydney, and packaged in fully recyclable, rain and tear resistant PE bags. Our sturdy, high quality packaging reduces the chances of bag damage on busy sites, reduces product loss, and extends the product’s life.

To learn more about the Crosbe Construction Grout range of products call us on 1300 797 560 or send us an enquiry.

CROSfill®

CROSfill® Construction Grout is a general purpose, high strength, Class A Construction Grout. It can be mixed to a stiff, plastic or flowable consistency, to an applied thickness of 10mm – 100mm. CROSfill® Construction Grout is specially formulated with Portland cement, graded fillers and performance additives to reduce water demand and shrinkage. These will control expansion whilst the grout is in the plastic stage.

Design features and benefits:

  • Versatile & easy to use pre-mixed grout
  • Rapid strength gain
  • Excellent flow properties
  • Durable, hard wearing finish
  • Free of chlorides & iron – will not rust or stain
COMPARISON TABLE
Technical Data Sheet
SAFETY DATA SHEET
CROSfill® 510

CROSfill® 510 is a general purpose cementitious (Class A) grout with shrinkage compensation in the plastic stage. It is suitable for most void filling grouting applications where it is essential to compensate initial shrinkage, including grouting column bases, machine base plates, anchor bolts, core holes, hollow block walls, and general concrete repair work.

CROSfill® 510 is specifically formulated with Portland cement, graded fillers, and performance additives to reduce water demand and shrinkage. The product can be mixed to a stiff, plastic or flowable consistency to an applied thickness of 10mm – 100mm.

Design features and benefits:

  • Versatile & easy to use pre-mixed grout
  • Shrinkage compensated
  • Rapid strength gain
  • Excellent non-sag properties
  • Durable, hard wearing finish
  • Free of chlorides & iron – will not rust or stain
COMPARISON TABLE
Technical Data Sheet
SAFETY DATA SHEET
CROSfill® 530

CROSfill® 530 is a high performance cementitious (Class C) grout with dual shrinkage compensation in both the plastic and hardened stages. It is suitable for critical void filling grouting applications where non-shrink performance is essential including, critical machine base plates, bridge bearing plates, anchor bolts and, pre-cast concrete sections. 

Specifically formulated with Portland cement, graded fillers, and performance additive to reduce water demand and shrinkage, CROSfill® 530 can be mixed to a stiff, plastic or flowable consistency to an applied thickness of 10mm – 100mm.

Design features and benefits:

  • Durable, versatile & easy to use
  • Dual shrinkage compensated
  • Rapid strength gain
  • Good impact and thermal resistance
  • Excellent flow properties
  • Free of iron – will not rust or stain
COMPARISON TABLE
Technical Data Sheet
SAFETY DATA SHEET
CROSfill® 570 Ultra-Flow & Cure

CROSfill® 570 Ultra-Flow & Cure is a rapid set, ultra-high flow, high strength, anchoring and patching grout. It is designed to be mixed to both a paste and a highly flowable consistency. CROSfill® 570 Ultra-Flow & Cure is specially formulated to provide incredibly high dimensional stability in both the plastic and hardened state, even at a highly flowable consistency.

Design features and benefits:

  • Versatile and easy to use premixed grout
  • Suitable for use as a very high flowable and plastic consistency grout
  • Extremely fast setting – sets hard in only 20-30 min
  • Rapid strength gain – 34 MPa after 2 hours when mixed to a highly flowable consistency
  • Suitable for use at low temperatures, down as low as 5C.
  • Excellent flow properties
  • Fully recyclable, rain and tear resistant PE bags.
TECHNICAL DATA SHEET
SAFETY DATA SHEET
CROSfill 570 Ultra Flow & Cure
CROSfill® 580 HES Precision Grout

CROSfill® 580 HES Precision Grout is a rapid set, ultra-high flow grout with both high early, and high final strength. It is specially formulated to provide incredibly high dimensional stability in both the plastic and hardened state, even at a high fluid consistency. A proven solution for high performance grouting applications where high strength gain and fast set is required, CROSfill® 580 HES can be mixed to a plastic or flowable consistency and applied thickness of 10mm – 100mm.

Formulated with Portland cement, graded fillers, and performance additive to reduce water demand and shrinkage, CROSfill® 580 HES can be used for most void filling grouting applications including core holes, grouting under precast panels and concrete sections, hollow block walls, under column bases, anchor bolt filling, and general concrete repair work. CROSfill® 580 HES is also suitable for critical grouting applications subject to dynamic loads or where continuous vibration is present, including machine base plates, bridge bearing plates, crane rails, and pre-cast concrete sections.

Design features and benefits:

  • Versatile & easy to use
  • Shrinkage compensated
  • Very rapid strength gain
  • Good impact and thermal resistance
  • Excellent flow properties
  • Contains no iron – will not rust or stain
  • Contains no Methocel or ligno-sulphonate based superplasticisers
  • Contains no aluminates or other gas producing additives
COMPARISON TABLE
TECHNICAL DATA SHEET
SAFETY DATA SHEET